We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Nextivity RSRF-LSP-50 RF Lightning Surge Protector | 0 to 3 GHz | N-Type F to F | 1.5 m Jumper Cable (N-Type M to M) | Plated Brass | For Nextivity Donor Antennas
⚡ Lightning surge protection: The RSRF-LSP-50 RF lightning surge protector is designed to shield Cel-Fi donor antenna and booster systems from lightning strikes and voltage surges, protecting your outdoor antenna.
🔒 50-ohm signal booster: This kit is suitable for 50-ohm signal booster systems, ensuring compatibility with your setup.
📡 Excellent VSWR: Featuring an excellent VSWR (Voltage Standing Wave Ratio) of 1.2:1, it aids in signal quality preservation.
🔌 N-female connectors: The surge protector comes with N-Female to N-Female connectors for seamless integration into your signal booster system.
🌐 Broad frequency range: It covers a wide DC ~3 GHz frequency range, accommodating various signal frequencies.
🛠 Inclusive kit: The kit includes a 5-foot jumper cable with N-type connectors and a 5-foot copper grounding wire with ring terminals, providing you with essential components for straightforward installation.
The RSRF-LSP-50 RF lightning surge protector safeguards your Cel-Fi donor antenna and booster systems from the impact of a lightning strike. Because the donor antenna is mounted outdoors and usually at the highest point on a home or building, it's susceptible to lightning and voltage surges caused by static build-up. We suggest using this simple device with our fixed cellular booster kits that come with an outdoor antenna.
The RSRF-LSP-50 RF connects near the donor antenna using the 5-foot jumper cable. Assemble the booster cable to the N-type connector on the opposite side of the surge protector. A 5-foot copper grounding wire secures the protector to a solid grounding point.
Key features
- Surge protector kit for 50-ohm signal booster systems
- Excellent VSWR: 1.2:1
- N-female to N-female connectors
- DC ~3 GHz frequency range
- Includes a 5-foot jumper cable with N-type connectors
- Includes a 5-foot copper grounding wire with ring terminals
Model Number | RSRF-LSP-50 |
---|---|
Brand | Nextivity |
Dimensions | 56.5 mm × 22.7 mm × 22.7 mm (2.22 in. × 0.89 in. × 0.89 in.) |
Temperature | –55 °C to 155 °C (–67 °F to 311 °F) |
Accessory Type | RF Lightning Protector |
Product Family | Nextivity Accessories |
Accessory Connector | N-Type |
Cable Connector 1 | N-Type Female |
Cable Connector 2 | N-Type Female |
Connector Type | N-Type Female to N-Type Female |
Material Connector | Tri-Metal Plated Brass |
Cable Material | PVC |
Cable Type | 5 ft. RS240 N-Male Jumper |
Cable Length | 1.5 m (5 ft) |
Operation Voltage | 230 V |
Nominal Impedance | 50 Ω |
Frequency | 0–3 GHz |
Insertion Loss | assy | ≤0.4 dB |
VSWR | ≤1.2:1 |