Full Spectrum of
Embedded Wireless
and OEM Solutions
For Production Volume
OEM Pricing, Please
Contact Us Direct:
Phone: (408) 282-3526
Sales Inquiry Form
Requires PayPal Account Log-In
BLUETOOTH - OEM MODULES
In just a few years, Bluetooth technology has penetrated almost every consumer market; from PDAs, mobile phones, personal computers, headsets, etc. With its robust FHSS technology and Audio capability, Bluetooth has established itself as the first ubiquitous WPAN RF standard.
|
 ** The Bluetooth logo is a registered trademark of the Bluetooth SIG |
| Model# : EWRN-41 | |
|---|---|
| Datasheet | |
| MSRP | $99 |
| Online Price | $49.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | 39 |
| 25+ | 34.3 |
| 100+ | CALL / EMAIL |
Bluetooth Module, Class 1, 2.0 EDR
Bluetooth Module RN-41 Class 1, 2.0 EDR:- Fully Qualified Bluetooth 2.0/1.2/1.1 module, using CSR BC04 External
- Class 1 high power amplifier, on Board ceramic RF chip antenna.
- Conforms to FCC, CE and the EMI standard of each country.
- Modular Approval: FCC ID: T9J-RN41-1, ICS: 6514A-RN411, CE: 0681
- Environmentally friendly, RoHS compliant.
- Bluetooth SIG Qualified as End Product Listing : B013180 (no additional testing or fees required)
- UART, USB, PCM interfaces available to various applications.
- SPP stack: sustained data rates- 240Kbps (slave), 300Kbps (master).
- 8MB on board flash, HCI, or SPP software stacks available.
- Embedded Bluetooth stack profiles included (requires no host MCU stack): BCSP, SPP, DUN, GAP SDP, RFCOMM, and L2CAP protocols.
- Baud rate speeds: 1200bps up to 921K bps, non-standard baudrates can be programmed.
- Class 1 radio, 330’ (100m) distance, 15db output transmitter
- Low power modes 50mA TX, 40mA RX (connected), 10ma (sniff mode), 2ma (idle ), 250ua(sleep)
- UART local and over-the-air RF configuration
| Wireless | Bluetooth 2.0 EDR, Class 1 |
|---|---|
| Bus Interface | UART, USB, PCM |
| Chipset | CSR BC04 External |
| Data Rate | 1200bps up to 921Kbps |
| Dimension | 13.2 x 25.8 x 2.05 [mm] |
| Security | HSS, 128 bit encryption |
| Output Power |
|
| Antenna | Ceramic Built-in Chip Antenna |
| RF Sensitivity | -80dBm typ. |
| O/S Support | |
| Temperature | -40 °C to +85 °C. |
| Certifications | |
| Networking | |
| Power Supply | 3.3V |
| Development Kit |
| Model# : PAN1310 | |
|---|---|
| Datasheet | download |
| MSRP | $99 |
| Online Price | $65.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | 61.8 |
| 25+ | 58.5 |
| 100+ | CALL / EMAIL |
BLUETOOTH PAN1310, Complete Bluetooth 2.0 + EDR solution
Capitalizing on the Bluetooth trend and enabling the smallest products is easier than ever with Panasonic’s PAN1310 Bluetooth module. It’s tiny footprint is just 100 mm2 (11.6 x 8.7 x 1.8 mm). The SMD LGA package allows for effi cient production and low component cost. The PAN1310 is shielded for superior RF performance and ensures FCC certifi cation. The PAN1310 is a class 2 module (range up to 10 meters) and is qualifi ed to the Bluetooth 2.0 standard. Ideal for power sensitive projects, this module has excellent power saving features in Deep Sleep Mode. The HCI interface is well suited for high volume, cost sensitive applications and an SPP version is planned for the near future.| Wireless | Bluetooth 2.0 + EDR solution |
|---|---|
| Bus Interface | 3.25 MBaud UART with transport layer detection (HCI UART, HCI Three-Wire UART) PCM/I2S interface for digital audio WLAN coexistence interface General purpose I/Os with interrupt capabilities. JTAG for boundary scan and debug |
| Chipset | Infineon Bluemoon |
| Data Rate | |
| Dimension | 11.6 x 8.7 x 1.8 [mm] |
| Security | |
| Output Power | |
| Antenna | |
| RF Sensitivity | -86 dBm |
| O/S Support | |
| Temperature | -40°C to 85°C |
| Certifications | |
| Networking | |
| Power Supply | 2.7-3.6V |
| Development Kit |
| Model# : EW-EZBTM02R | |
|---|---|
| Datasheet | |
| MSRP | $129 |
| Online Price | $99.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | 89.1 |
| 25+ | 77.2 |
| 100+ | CALL / EMAIL |
Class 2 Surface Mountatble RoHS-compliant Bluetooth v1.1 qualified Module
Bluetooth module supporting host interfaces UART and USB and can support full BT data rates of 723.2k/57.6kbps. A 13-bit PCM, 8k sample/sec, synchronous bidirectional audio interface is also available. Utilizes BC02-EXT, CSR's single chip BT solution, 4dBm output power for class 2 operation and -95dBm receive sensitivity. Piconet capability. Other stack options available by firmware upgrade: RFCOMM, On-chip profiles and applications| Wireless | Bluetooth v1.1 Qualified |
|---|---|
| Bus Interface | USB or UART |
| Chipset | CSR BC02-EXT |
| Data Rate | 723.2k/57.6kbps |
| Dimension | 25(L) x 14.5(W) x 2.05(H) [mm] |
| Security | |
| Output Power | Extensive power saving modes, including Park, Hold, Sniff and Deep Sleep |
| Antenna | External RF Port |
| RF Sensitivity | -95dBm @ 0.1% BER at 2.441 GHz |
| O/S Support | Supports Device Firmware Upgrade (DFU) over USB and UART |
| Temperature | -15? C to +70? C |
| Certifications | |
| Networking | |
| Power Supply | 3.3 Volt |
| Development Kit |
| Model# : EW-EZBTM04 | |
|---|---|
| Datasheet | |
| MSRP | $129 |
| Online Price | $99.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | 89.1 |
| 25+ | 77.2 |
| 100+ | CALL / EMAIL |
Class 2 Surface Mountatble Bluetooth v1.2 Compliant Module for Multimedia Applications
Bluetooth module supporting host interfaces UART and USB and can support full BT data rates of 723.2k/57.6kbps. Complete Bluetooth stack for Audio applications: USB Audio Source, Audio Transmitter or Audio Receiver. Utilizes BC03-MM, CSR's single chip BT solution, 4dBm output power for class 2 operation and -85dBm receive sensitivity. Piconet capability. Complete Bluetooth stack for serial cable Replacement applications: SPP Master and SPP Slave| Wireless | Bluetooth v1.2 Compliant |
|---|---|
| Bus Interface | USB or UART |
| Chipset | CSR BC03-MM |
| Data Rate | 723.2k/57.6kbps |
| Dimension | 15(L) x 15(W) x 2.2(H) [mm] |
| Security | |
| Output Power | Extensive power saving modes, including Park, Hold, Sniff and Deep Sleep |
| Antenna | External RF Port |
| RF Sensitivity | -85dBm @ 0.1% BER at 2.441 GHz |
| O/S Support | Supports Device Firmware Upgrade (DFU) over USB and UART |
| Temperature | -40? C to +75? C |
| Certifications | |
| Networking | |
| Power Supply | 3.3 Volt |
| Development Kit |
| Model# : EW-EZBTM05 | |
|---|---|
| Datasheet | |
| MSRP | $129 |
| Online Price | $99.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | 89.1 |
| 25+ | 77.2 |
| 100+ | CALL / EMAIL |
Class 2 Surface Mountatble Bluetooth v1.2 Compliant Module with an external EEPROM for module specific configurations
Bluetooth module supporting host interfaces UART and USB and can support full BT data rates of 723.2k/57.6kbps. Utilizes BC03-ROM, CSR's single chip BT solution, 4dBm output power for class 2 operation and -85dBm receive sensitivity. HCI level stack with UART or USB host interface. Piconet capability.| Wireless | Bluetooth v1.2 Compliant |
|---|---|
| Bus Interface | USB or UART |
| Chipset | CSR BC03-ROM |
| Data Rate | 723.2k/57.6kbps |
| Dimension | 15(L) x 15(W) x 1.85(H) [mm] |
| Security | |
| Output Power | Extensive power saving modes, including Park, Hold, Sniff and Deep Sleep |
| Antenna | External RF Port |
| RF Sensitivity | -85dBm @ 0.1% BER at 2.441 GHz |
| O/S Support | HCI level stack with UART or USB host interface |
| Temperature | -40? C to +75? C |
| Certifications | |
| Networking | |
| Power Supply | 3.3 Volt |
| Development Kit |
| Model# : EWBGMR01 | |
|---|---|
| Datasheet | |
| MSRP | $ |
| Online Price | $99.00 |
| Volume QTY | Volume Price |
|---|---|
| 10+ | $89.10 |
| 25+ | $84.20 |
| 100+ | CALL / |
[EW-WMBGMR01] Combo WiFi 802.11 b/g + Bluetooth™ 1.1 / 1.2 (Class 2) SIP Module OEM module
16-bit PCMCIA / Compact Flash / CF+
This powerful wireless SiP (system-in-package) combo module is favored amongst developers looking for reliable Data (WiFi 802.11b/g) and Voice (Bluetooth™ 1.1 / 1.2 compliant) capability.This module supports a multitude of interfaces as well as having (2) antenna connectors, one for each wireless standard; it is also Pb (Lead) Free.
| Wireless | 802.11b/g and Bluetooth™ 1.1 and 1.2 |
|---|---|
| Interface / Connector | WiFi: 16-bit PC Card (PCMCIA), CompactFlash and CF+ bus Bluetooth™: UART (default 115.2 kbps, range: 9.6 - 921.6 kbps) |
| RF/BB Chipset | 802.11b/g: Marvell 'Libertas' 88W8385 + 88W8010 Bluetooth: CSR BlueCore 03-ROM |
| Data Rate | 802.11b/g: 1,2, 5.5,11,6,9,12,24,36,48,54 Mbps |
| Dimension | 27 x 22 [mm] |
| Security | WEP 64/128, WPA and TKIP, AES |
| RF Output Power | 802.11g : 14 dBm ±1.0 dBm @1, 2, 5.5, 11Mbps 14 dBm ±1.0 dBm @6, 9Mbps / 12 dBm ±1.0 dBm @ > 12Mbps Bluetooth 1 dBm (typical) |
| RF Sensitivity | 802.11g: PER <10%, Rx Sensitivity @ 54 Mbps @ -72dBm Bluetooth: -81 dbm @ 0.1% BER @ 25° Celsius (Typical) |
| Power Consumption | Transmit = 450 mA (Typical) / Receive = 275 mA Sleep connected = 1mA (Average) / Inrush current = 3000 mA (Max) |
| O/S Support | Windows CE4.2/5.0, Pocket PC 2003/2004, Linux |
| Temperature: Operating/Storage | -20 °~60 ° / -40 ° ~ 85 ° |
| Antenna Option | Two antenna connectors, each support 802.11b/g OR Bluetooth. (Hirose W.FL –R –SMT(10) RF connector) |
| EMC Certification |