Embedded Works

B+B SmartWorx RT3G-354 3G ROUTER W/802.15.4 WIRELESS MESH, 1 ETH, 1 USB, 1 RS-485

3G ROUTER W/802.15.4 WIRELESS MESH, 1 ETH, 1 USB, 1 RS-485



MSRP $658.90 - Save $59.90 (9.09%)
Buy MoreSave More
100+Need volume? - Get Quote
B+B SmartWorx RT3G-354 3G ROUTER W/802.15.4 WIRELESS MESH, 1 ETH, 1 USB, 1 RS-485

Product Features:
  • EV-DO/CDMA and HSPA+/GPRS/GSM cellular networks in one SKU
  • Up to 5.7 Mbps upload and 14.4 Mpbs download speeds
  • Industrial wide operating range (-30 to +60 C)
  • 10-30 VDC
  • Class 1/Division 2 Certified
  • Modbus compatible
  • WiFi 802.11 b/g/n AP

Built for simplicity with remote management, deployment and customization, the Spectre 3G cellular router is used to wirelessly connect Ethernet equipment and devices to the Internet or intranet. It creates secure connections in locations where cable connections are impractical. The standard configuration includes a 10/100 port, USB host port, binary I/O port and dual SIMs. Network redundancy is provided by the 2nd SIM card holder. It also has 2 auxiliary ports for connecting to other types of networks such as additional Ethernet switch ports, RS-232, RS-485/422 interfaces and additional Digital/Analog I/O. The function of each port is dependent on the specific router model. An additional option is integrated 802.11b/g/n WiFi , which allows the Spectre to serve as a WiFi Access Point (AP)/Hotspot.

The router supports the creation of VPN tunnels using IPsec, OpenVPN and L2TP to ensure safe communication. The web interface provides detailed statistics about router activities, signal strength, etc. The router supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and many other functions. The router provides diagnostics which include automatically monitoring the PPP connection, automatic restart in case of connection losses, and a hardware watchdog that monitors the router status. The router can automatically upgrade its configuration and firmware remotely, allowing for mass reconfiguration of numerous routers at the same time. Additional management software, like R-SeeNet, for router monitoring are also supported.

PowerSource: 10 - 30 VDC
300 mW receive mode
Up to 3.5 W (GPRS transmission)
Up to 5.5 W (UMTS/HSDPA transmission)
Battery Life
CertificationsFCC Part 15, CE
Class 1/Division 2
Certifications: AT&T, Rogers, T-Mobile, Sprint, Verizon, Telus, PTCRB
EN 301 511, v9.0.2
EN 301 908-1&2, v3.2.1
ETSI EN 301 489-1 V1.8.1v
EN 60950-1:06 ed.2 + A11:09 + A1:10
Emission: EN 55022/B
Immunity: ETS 300 342 immunity
Safety: EN 60950
Isolation: EN 60747 isolation
Maximum Operating TemperaturesOperating Temperature: -30 to 60°C
Storage Temperature: -40 to 85°C
Device Range
Device SpecificationsInterfaces:

USB USB Type A Host
Binary I/O
1 input / 1 output
Port Options

SIM Card
SIM Card
Expansion Port Options
Ethernet 10/100 Mbps
 4 Binary inputs
 2 Analog inputs (4-20 mA)
 1 Binary output (2 inputs may be configured as counters)
Antenna / Cellular & Wi-Fi:
SMA - 50 Ohms
3G: 2 dBi, penta band, right angle dipole (2)
WiFi: 1.8 dBi right angle dipole (1)
Frequency bands Quad Band UMTS (WCDMA): 850, 900,1900 and 2100 MHz
Quad-Band GSM/GPRS/EDGE: 850, 900, 1800 and 1900 MHz

WiFi Specifications
802.11 b/g/n - 2.4 GHz
RX Sensitivity
(HT20) 11n
(HT20) 11n
11 Mbps
54 Mbps
-85 dBm
-70 dBm
-66 dBm
-62 dBm
TX Output Power
11 Mbps 54
19 dBm
16 dBm
15 dBm
15 dBm
Security Protocols
64/128 WEP, TCIP, AES

DHCP - automatic IP addressing in LAN network
NAT - IP address and ports translation between inside/outside network
Firewall - filtering of addresses, ports, protocols
VRRP - virtual backup router function
DynDNS client - access to the router with a dynamic IP address
VLAN 802.11Q - virtual LAN
QoS - quality of service
Dial-in - Communicate via CSD call
PPPoE Bridge - PPP frames encapsulation inside ETH frames
VPN Tunneling
IPsec, OpenVPN, L2TP - secure encrypted tunnels
GRE tunnel - simple tunnel without security measures
HTTP server - configuration via web server
Telnet - configuration and access to the file system
SNMP - router diagnostics, communication with I/O and M-Bus
Cellular state signalization by LED
On-line info on cellular signal status (level, cell, neighbors)
SMS info - power on, cellular connection or disconnection
SMS control - on/off cellular connection, switch SIM, I/O, etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH - encrypted configuration and access to the file system
Linux based: program your own applications
NTP client, NTP Server - time synchronization
SMS communication - AT commands on RS232, Ethernet and I/O
M-RAM memory inside - router statistic saved into memory
Dimensions1.7 x 3.0 x 4.5 in (42 x 76 x 113 mm), 35mm DIN rail
Enclosure Materialmetal
Operating Frequency
Packing List2 3G right-angle dipole antenna 1 AC power adaptor
1 WiFi right-angle dipole antenna 1 DIN rail clip
1 Ethernet cable
Search in Results:
  • Show
  • Per Page