Embedded WorksTrackingForLessSensorWorks

B+B SmartWorx ERT351 LAN ROUTER, WLS MESH 802.15.4, 3 ETH, 1 USB, I/O

LAN ROUTER, WLS MESH 802.15.4, 3 ETH, 1 USB, I/O

ERT351

$449.00

MSRP $493.90 - Save $44.90 (9.09%)
Buy MoreSave More
10+$449.00
25+$449.00
100+Need volume? - Get Quote
Spectre RT Industrial Router

Product Features
  • VPN security
  • Firewall support
  • NAT/PAT address & port translation
  • SNMP management
  • Wide temperature range -40 to 75°C
  • Complies with NEMA TS1 & TS2

The Spectre RT industrial router connects Ethernet equipment in tough environments where office-grade equipment canít handle the job. With Ethernet, USB, I/O and auxiliary ports itís a flexible device with the built-in ability to handle multiple data communications protocols and to fit into virtually any network topology.

The Spectre RT supports the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software. A password-protected Web interface allows users to configure and manage the Spectre RT from remote locations. The router can automatically upgrade its configuration and firmware from the operatorís central server, allowing for simultaneous mass reconfiguration of every router on the network.

Users may insert Linux scripts and they can create up to four different configurations for the same router. Examples would include binary input configurations. Users may switch from one configuration to another at any time.

PowerSource 10 - 30 VDC
Consumption Max. 200 mA (12 VDC)
Battery Life
CertificationsCE, FCC, NEMA TS2
EN 301 511, v9.0.2
EN 301 908-1&2, v3.2.1
ETSI EN 301 489-1 V1.8.1
EN 60950-1:06 ed.2 + A11:09 + A1:10
IEC60068-2-27, Shock 50G peak, 11ms, 3 axes
IEC60068-2-6, Vibration 10-500Hz, 4G, 3 axes
Maximum Operating TemperaturesOperating Temperature: -40 to 75°C
Storage Temperature: -40 to 85°C
Device Range
Device SpecificationsInterfaces:

Standard
Ethernet
10/100MB
USB USB Type A Host
Binary I/O
Binary I/O
Port Options

Port 1
Ethernet 10/100, RS-232, RS-422/485, Modbus,
CNT (I/O)
Port 2
RS-232, RS-422/485, Modbus, CNT (I/O)
I/O CNT
4 Binary inputs, 1 Binary output (2 inputs maybe
configured as counters)
2 Analog inputs, I Binary output
Internal

32b ARM microprocessor
512 Mb DDR SDRAM
128 Mb Flash
1 Mb MRAM


Features:

Networking
DHCP - automatic IP addressing in LAN network
NAT - IP address and ports translation between inside/outside
network
Firewall: filtering of addresses, ports, protocols
VRRP - virtual backup router function
DynDNS client - access to the router with a dynamic IP address
VLAN 802.11Q: virtual LAN
QoS: quality of service
Dial-in - Communicate via CSD call
NTP client, NTP Server: time synchronization
PPPoE Bridge - PPP frames encapsulation inside ETH frame
VPN Tunneling
IPsec, OpenVPN, L2TP - secure encrypted tunnels
GRE tunnel - simple tunnel without security measures
Configuration
and
Diagnostics
HTTP server - configuration via web server
Telnet - configuration and access to the file system
SNMP - router diagnostics, communication with I/O and M-BUS
Remote router group configuration change, switching among
configuration profiles
SSH - encrypted configuration and access to the file system
Additional
Functions
Linux based: program your own applications
AT commands on RS232, Ethernet and I/O
M-RAM memory inside - router statistic saved into memory
Dimensions11.4 x 9.5 x 4.2 cm (4.49 x 3.74 x 1.65 in)
Applications
Enclosure Materialmetal
Operating Frequency
Packing List
Search in Results:
clear
  • Show
  • Per Page