The Monnit Wi-Fi water detection sensor alerts of potential
property damage that results from flooding or leaks. Place
sensor anywhere flooding or faulty plumbing could cause a problem.
This sensor can also be used to detect a lack of water, allowing you
to know when a container is nearing empty. An integrated 802.11 b/g
radio allows the device to be easily programmed to work with any
existing Wi-Fi network. This version of the Wi-Fi sensor uses a
high gain antenna to provide a 20-30% increase in range
over the standard Wi-Fi sensor. Monnit Wi-Fi sensors can be
programmed with 802.11 security via a USB cable and free MoWi
Utility for Windows, keeping the user's Wi-Fi network secure. User
defined intervals (heartbeats) and sensor thresholds ensure
that sensor data is received when needed, based on the application.
All sensor data is stored securely in the iMonnit Online Monitoring
software and is viewable from the web. Email/SMS messages can be
configured through the online system to alert the user immediately
when a defined parameter has been met or exceeded.
Note - If customized external leads are needed for
placement, call a sales representative to
customize your order.
- 802.11 b/g
- Up to 250 ft.
- Open, WEP, WPA, WPA2 Security Standards
- High gain, RPSMA antenna provides 20-30% increase in range.
- Senses immediate presence of water.
- Can also sense non-presence of water.
- Use for detection of any non-combustible liquid.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency, sensor type,
Wi-Fi security type, distance from router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows.
Mac and Linux are not currently supported!