The Monnit Wi-Fi Button Sensor allows a notification signal to be
sent when immediate contact is important. The Monnit Wi-Fi button
sensor is a push button alerting unit with an integrated 802.11 b/g
radio transmitter that can be easily programmed to work with any
existing Wi-Fi network. This version of the Wi-Fi sensor uses a
detachable high gain antenna to provide a 20-30% increase in range
over the standard Wi-Fi sensor. Monnit Wi-Fi sensors can be easily
programmed with Wi-Fi network security via a low cost USB
programming cable, available here, and the free MoWi Setup Utility
for Windows® PC's, keeping the user's Wi-Fi network secure. User
defined transmission intervals (heartbeats) and sensor threshold
settings ensure that sensor data is received when needed, based on
the application. All sensor data is stored securely in the iMonnit
Online Sensor Monitoring software and is viewable from any web
enabled device. Email and SMS text messages can be configured
through the online system to alert the user immediately when a
defined parameter has been met or exceeded.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- High gain, RPSMA antenna provides 20-30% increase in range.
- Manually triggered push button.
- LED response indicator.
*Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from Wi-Fi
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!