The Monnit Wi-Fi temperature sensor uses a thermistor to accurately
measure temperatures. Perfect for slower changing temperatures and
critical applications such as facilities or rooms. An integrated
802.11 b/g radio transmitter allows the device to be easily
programmed to work with any existing Wi-Fi network. This version of
the Wi-Fi sensor uses a detachable high gain antenna to provide a
20-30% increase in range over the standard Wi-Fi sensor. Monnit
Wi-Fi sensors can be easily programmed with Wi-Fi network security
via a low cost USB programming cable, available here, and the free
MoWi Setup Utility for Windows® PC's, keeping the user's Wi-Fi
network secure. User defined transmission intervals (heartbeats) and
sensor threshold settings ensure that sensor data is received when
needed, based on the application. All sensor data is stored securely
in the iMonnit Online Sensor Monitoring software and is viewable
from any web enabled device. Email and SMS text messages can be
configured through the online system to alert the user immediately
when a defined parameter has been met or exceeded.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- High gain, RPSMA antenna provides 20-30% increase in range.
- Accurate to +/- 1°C (1.8°F).
- Good for slower changing temperatures.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!