The Monnit Wi-Fi water detection sensor alerts you of potential
property damage that results from flooding or leaks. Place this
sensor anywhere flooding or faulty plumbing could cause a problem.
This sensor can also be used to detect a lack of water, allowing you
to know when a container is nearing empty. An integrated 802.11 b/g
radio transmitter allows the device to be easily programmed to work
with any existing Wi-Fi network. Monnit Wi-Fi sensors can be easily
programmed with Wi-Fi network security via a low cost USB
programming cable, available here, and the free MoWi Setup Utility
for Windows® PC's, keeping the user's Wi-Fi network secure. User
defined transmission intervals (heartbeats) and sensor threshold
settings ensure that sensor data is received when needed, based on
the application. All sensor data is stored securely in the iMonnit
Online Sensor Monitoring software and is viewable from any web
enabled device. Email and SMS text messages can be configured
through the online system to alert the user immediately when a
defined parameter has been met or exceeded.
Note - If customized external leads are needed for placement, call a
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- Senses immediate presence of water.
- Can also sense non-presence of water.
- Use for detection of any non-combustible liquid.
*Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from Wi-Fi router and
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows.
Mac and Linux are not currently supported!