The Monnit Wi-Fi open/closed sensor provides information on the
status of doors, windows, cabinets, etc. Know if a building or
specific area is being accessed when it should not be, or if a door
or window has been left open. An integrated 802.11 b/g radio
transmitter allows the device to be easily programmed to work with
any existing Wi-Fi network. Monnit Wi-Fi sensors can be easily
programmed with Wi-Fi network security via a low cost USB
programming cable, available here, and the free MoWi Setup Utility
for Windows® PC's, keeping the user's Wi-Fi network secure. User
defined transmission intervals (heartbeats) and sensor threshold
settings ensure that sensor data is received when needed, based on
the application. All sensor data is stored securely in the iMonnit
Online Sensor Monitoring software and is viewable from any web
enabled device. Email and SMS text messages can be configured
through the online system to alert the user immediately when a
defined parameter has been met or exceeded.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- Sense immediate door access.
- Sense if a door, window, drawer is opened or has been left
- Monitor access to specific areas of buildings.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!