The Monnit Wi-Fi activity sensor is a vibration sensing unit with an
integrated 802.11 b/g radio transmitter that can be easily
programmed to work with any existing Wi-Fi network. Monnit Wi-Fi
sensors can be easily programmed with Wi-Fi network security via a
low cost USB programming cable, available here, and the free MoWi
Setup Utility for Windows® PC's, keeping the user's Wi-Fi network
secure. User defined transmission intervals (heartbeats) and sensor
threshold settings ensure that sensor data is received when needed,
based on the application. All sensor data is stored securely in the
iMonnit Online Sensor Monitoring software and is viewable from any
web enabled device. Email and SMS text messages can be configured
through the online system to alert the user immediately when a
defined parameter has been met or exceeded.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- Detects sudden movement.
- Tell if a motor or machine is on or off.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!