The Monnit Wi-Fi dry contact sensor can be used to detect contact
between two wired contact points that can be used with an external
mechanical switch or a contact plate. An integrated 802.11 b/g radio
transmitter allows the device to be easily programmed to work with
any existing Wi-Fi network. Monnit Wi-Fi sensors can be easily
programmed with Wi-Fi network security via a low cost USB
programming cable, available here, and the free MoWi Setup Utility
for Windows® PC's, keeping the user's Wi-Fi network secure. User
defined transmission intervals (heartbeats) and sensor threshold
settings ensure that sensor data is received when needed, based on
the application. All sensor data is stored securely in the iMonnit
Online Sensor Monitoring software and is viewable from any web
enabled device. Email and SMS text messages can be configured
through the online system to alert the user immediately when a
defined parameter has been met or exceeded.
Note - If customized external leads are needed for placement, call a
sales representative to customize your order.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- 12 Inches
- Senses immediate contact between wires.
- Can also sense when contact is broken.
- Variety of lead lengths available.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!