The Monnit Wi-Fi temperature sensor uses an external sensor probe to
measure temperature with more accuracy and greater thermal range.
Perfect for fast changing, temperature critical applications such as
coolers or heaters. An integrated 802.11 b/g radio transmitter
allows the device to be easily programmed to work with any existing
Wi-Fi network. Monnit Wi-Fi sensors can be easily programmed with
Wi-Fi network security via a low cost USB programming cable,
available here, and the free MoWi Setup Utility for Windows® PC's,
keeping the user's Wi-Fi network secure. User defined transmission
intervals (heartbeats) and sensor threshold settings ensure that
sensor data is received when needed, based on the application. All
sensor data is stored securely in the iMonnit Online Sensor
Monitoring software and is viewable from any web enabled device.
Email and SMS text messages can be configured through the online
system to alert the user immediately when a defined parameter has
been met or exceeded.
- 802.11 b/g (2.412 - 2.484 GHz)
- Up to 250 ft. (Typical to standard Wi-Fi devices)
- Open, WEP, WPA, WPA2 Security Standards
- Accurate to +/- 1°C (1.8°F).
- Probe temp range: -40°C to +125°C (-40° to 257°F).
- Good for fast changing temperature.
- 3 ft external temperature probe.
* Actual range may vary depending on environment.
** Battery life is affected by reporting frequency (heartbeat),
sensor type, Wi-Fi security type, distance from
router and other variables.
In order to program the sensor to connect to your wif-fi network,
you will need a Wi-Fi programming cable and the free MoWi setup
utility. The MoWi setup utility is currently available for Windows®
PC's only. Mac and Linux are not currently supported!