Embedded WorksTrackingForLessSensorWorks

Monnit MNS-9-PC-IN-SI-SOL Industrial Pulse Counter (Single Input) - Solar Powered w/ AA Bat. / Grade: Industrial

Industrial Pulse Counter (Single Input)

MNS-9-PC-IN-SI-SOL

$199.00

MSRP $199.00 - Save $0.00 (0.00%)
Buy MoreSave More
10+$199.00
25+$199.00
100+Need volume? - Get Quote
Monnit's industrial wireless single input pulse counter can be integrated with a water or power meter that provides a pulse output to count the number of actuations occurring within a given time frame.

The pulse counter is by default, set-up to operate with signals that are less than 10Hz.  Through software it can be changed to a maximum of 20Hz.

This industrial wireless sensor features a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 5 years.

Product Features
  • 900 MHz Operating Frequency
  • Rechargeable, Single AA, 2500mAH, 3.6V Battery
  • -40° to 85°C (-40° to 185°F)
  • 300 - 350 ft. non-line-of-sight device range*
  • Up to 5 Year Battery Life.**
  • IP66 NEMA 4X, CE rated, sealed, weatherproof enclosure.
  • External 3dBi RP SMA antenna (included)
  • Counts the number of pulses in given time frame. (User can set to aggregate pulses, or set to report each pulse as an individual event.)
  • Product comes with standard 36 in wires.
  • FCC and IC certified.
  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
PowerSolar Rechargeable, Single AA, 2500mAH, 3.6V Battery
Battery LifeUp to 5 Year Battery Life.
CertificationsComplies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)
Maximum Operating Temperatures-40 to 85C (-40 to 185F)
Device Range300 - 350 ft. non-line-of-sight device range
Device SpecificationsAntenna Type:    External 3dBi RP SMA antenna (included)
 
Pulse Counter Specifications    
Number of Inputs / Counters:    1 (Single)
Detection Wires:    High Impedance (2-Wire), 3 ft. length
Counter Operation:    Positive and / or Negative Edge Pulses
Compatibility:    Open Collector NPN Switches (Passive) , Mechanical Switches (Passive), 0-15V Driven Source (Active)
Maximum Count:    4,294,967,296 (32 bit number)
Input Voltage:    0 to 15 Volts DC

Max Input Pulse Rate /
Min Pulse Width
with Passive Input

No Filter
4 Hz Filter
40 Hz Filter
(Positive Edge)
~1.2 KHz / 800 us
~5 Hz / 200 ms
~50 Hz / 20 ms
(Negative Edge)
~1.2 KHz / 800 us
~34 Hz / 29 ms
~280 Hz / 3.6 ms

Special Specifications
Material: Amorphous Silicon
Operating Characteristics: 3.3V, 36.0 mA
Pmax: 125 mW (3.9V, 32.0 mA)
Max Output Voltage: 5.1V
Dimensions3.7 in x 2.32 in x 1.38 in
ApplicationsTurn Style Counter
Count number of acctuations
Enclosure MaterialIP66 NEMA 4X, CE rated, sealed, weatherproof enclosure.
Operating Frequency900Mhz (N. America)
Packing ListIndustrial Sensor
High Gain Antenna
Solar Panel (attached to housing)
Single 3V Rechargeable AA Battery (pre-installed inside sealed sensor housing)
Search in Results:
clear
  • Show
  • Per Page