Embedded Wireless and OEM Solutions

  Full Spectrum of
  Embedded Wireless
  and OEM Solutions

 
Model# : EWRN-41
MSRP$99.00
Price$49.00
You Save$50.00 (51%)
Volume QTYVolume Price
10+$39.00
25+$34.30
100+Get Quote

   

Bluetooth Module, Class 1, 2.0 EDR

Bluetooth Module RN-41 Class 1, 2.0 EDR:
  • Fully Qualified Bluetooth 2.0/1.2/1.1 module, using CSR BC04 External
  • Class 1 high power amplifier, on Board ceramic RF chip antenna.
  • Conforms to FCC, CE and the EMI standard of each country.
  • Modular Approval: FCC ID: T9J-RN41-1, ICS: 6514A-RN411, CE: 0681
  • Environmentally friendly, RoHS compliant.
  • Bluetooth SIG Qualified as End Product Listing : B013180 (no additional testing or fees required)
  • UART, USB, PCM interfaces available to various applications.
  • SPP stack: sustained data rates- 240Kbps (slave), 300Kbps (master).
  • 8MB on board flash, HCI, or SPP software stacks available.
  • Embedded Bluetooth stack profiles included (requires no host MCU stack): BCSP, SPP, DUN, GAP SDP, RFCOMM, and L2CAP protocols.
  • Baud rate speeds: 1200bps up to 921K bps, non-standard baudrates can be programmed.
  • Class 1 radio, 330’ (100m) distance, 15db output transmitter
  • Low power modes 50mA TX, 40mA RX (connected), 10ma (sniff mode), 2ma (idle ), 250ua(sleep)
  • UART local and over-the-air RF configuration
Thank You For Choosing Embedded Works

Specifications
Wireless StandardBluetooth 2.0 + EDR, Class 1
Frequency2402 - 2480 MHz
InterfaceUART, USB, PCM
ChipsetCSR BC04 External
Data Rate1200bps up to 921Kbps
Dimension13.2 x 25.8 x 2.05 mm
Output Power15 dBm max.
Power Consumption
  • Standby/Idle (Dedault settings) 25mA Typ.
  • Standby/Idle (Lowest Power) 250uA Min, 2.5mA Typ.
  • Connected(normal mode) 30mA
  • Connected( low power Sniff) 8mA
AntennaCeramic Built-in Chip Antenna
RF Sensitivity-80dBm typ.
Channels79CH (1MHz Channel Intervals)
I/O Options
SecurityHSS, 128 bit encryption
Temperature-40 °C to +85 °C.
Certifications
Networking
O/S Support