Embedded WorksTrackingForLessSensorWorks
Search in Results:
  • Show
  • Per Page

Embest Gertboard

I/O Extension Board for the Raspberry Pi

Model : Gertboard


MSRP $92.00 - Save $12.00 (13.04%)
Buy MoreSave More
100+Need volume? - Get Quote
The Gertboard is an input/output (I/O) extension board for the Raspberry Pi computer. It fits onto the GPIO (general purpose I/O) pins of the Raspberry Pi (the double row of pins on the upper left corner) via a socket on the back of the Gertboard. A bit of care is required when putting the two devices together. It is easy to insert just one row of pins into the socket, but all of the pins need to be connected. The Gertboard gets its power from those GPIO pins, so you will need a power supply for the Raspberry Pi (RPi) that is capable of supplying a current of at least 1A.

The Gertboard has collection of functional blocks (the major capabilities of the board) which can be connected together in a myriad of ways using header pins. The functional blocks are:

  • 12x buffered I/O
  • 3x pushbuttons
  • 6x open collector drivers (50V, 0.5A)
  • 18V, 2A motor controller
  • 28-pin dual in line ATmega microcontroller
  • 2-channel 8, 10, or 12 bit Digital to Analogue converter
  • 2-channel 10 bit Analogue to Digital converter
prev next